83
Spectacle Kit
G1 SCBA 2018 Edition
US
(4) Push one end of the wire frame up into the facepiece so the
frame is in position along the edge where the lens and face-
blank meet.
(5) Make sure the end of the wire frame is in position in the
small pockets in the faceblank on the edge of the lens.
(6) Do Steps (4) and (5) on the opposite side.
(7) Don the facepiece.
(8) Adjust the lens frame up/down and in/out to optimize fit and
visibility.
To Next Page
Loading...
