3-17
BIOS Setup
Wake Up By Keyboard
The item specifies how the system will be awakened from power saving
mode when input signal of the keyboard is detected. If set to Specific
Key, <Ctrl+Alt+BackSpace> is the only Power On event. If set to Password,
please press <Enter> to input password and its maximum password is 5
character. Setting: Disabled, Any Key, Sepcific Key and Password.
Wake Up By PS/2 Mouse
This item specifies whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.
PS2 MOUSE Wake Select Mode
When Wake Up By PS/2 Mouse is set to Enabled, you may use this item
to specify the PS2 mouse wake-up mode. Settings: Click & Move, Click.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled,
Disabled.
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically resume
(boot up) on a specific date/hour/minute/second specified in these fields.
Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
To Next Page
Loading...
