4-18
Power On by Ring
When it is set to [Enabled], the feature allows your system to be powered on by the
serial Ring Indicator (RI) line.
USB KB Wake-Up from S3
This setting allows you to enter “Any Key” (max. 8 numbers) to wake up the system
from S3 state.
Resume by Alarm
This function is for setting time for your computer to boot up.
Date (of Month) Alarm
The field specifies the date for Resume by RTC Alarm. Settings: [0]~[31].
Time (hh:mm:ss) Alarm
The field specifies the time for Resume by RTC Alarm. Format is <hour><minute>
<second>.
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Former-sts] Restores the system to the status before power failure
or interrupt occurred.
To Next Page
Loading...
