Chapter 2
2-28
RDRAM Over Voltage Jumper: J20
The jumper is used to set the RDRAM voltage for overclocking purpose.
Over Voltage
(2.68V)
1
3
1
3
Over Voltage
(2.58V)
1
3
Normal
(2.5V)
Over Voltage
This motherboard is designed to support over voltage.
However, please make sure your components are able to
tolerate such abnormal setting, while doing over voltage.
Any attempt to operate beyond product specifications is not
recommended. We do not guarantee the damages or risks caused by
inadequate operation or beyond product specifications.
Avoid setting J20 while the sytem is on. It will damage the RDRAM.
WARNING!
J20
1
To Next Page
Loading...
