MSI Smart Key
A-3
Using MSI Smart Key
BIOS Setup
When the Smart Key is inserted into your computer, the BIOS
will detect it automatically. You can enable or disable the Smart Key
through the BIOS setting. Please note that it needs a personalized
password to execute any kind of Smart Key setting; so, keep the pass-
word firmly in mind. If, unfortunately, the Smart Key is lost or the
password is missed, you can not enter the operating system
successfully. At this time, contact your local dealer for further service.
Enable/Disable the Smart Key
The first time installation
1. Insert the Smart Key into the computer and turn on the power.
2. Press <F7> during system boot up.
3. The message as below appears on the screen asking you to
enable or disable the key:
Please input your password and press “Enter”
password:
Welcome to MSI Smart Key, please press “Y” to begin,
press “N” to exit
Type <Y> to enable it; type <N> to disable it and bypass the
BIOS to enter the operating system. When you type <Y>, it shows
the following message:
To Next Page
Loading...
