3-17
BIOS Setup
Resume By PCI Device (PME#), Resume By PCIE Device (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PCI/PCIE PME (Power Management
Event). Settings: [Enabled], [Disabled].
Resume By RTC Alarm
The field is used to enable or disable the feature of booting up the system on
a scheduled time/date. Settings: [Enabled], [Disabled].
Date
The field specifies the date for Resume By RTC Alarm. Settings: [0]~[31].
Time (HH:MM:SS)
The field specifies the time for Resume By RTC Alarm. Format is <hour>
<minute><second>.
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.
To Next Page
Loading...
