may want to manually sync the disks for avoiding data loss.
Follow these steps to sync manually.
1. Reboot system, during the Power-On Self Test (POST) press, press <Ctrl> and
<I> keys simultaneously to enter the Intel Rapid Storage Technology Option ROM.
2. Select option 5 “Acceleration Options” and press <Enter> key. The following
screen appears.
[ ]
ACCELERATION OPTIONS
[ ]
HELP
Name
the Accelerated Disk/Volume.
Press 'r' to remove the Disk/Volume Acceleration.
WARNING: IT IS RECOMMENDED THAT YOU [ERFORM A SYNCHRONIZATION
BEFORE REMOVING ACCELERATION.
Type Capacity Status
DISK PORT 0 Non-RAID Disk
Mode
No Sync
[ ]
ACCELERATION OPTIONS
Name Type Capacity Status
DISK PORT 0 Non-RAID Disk
Mode
In Sync
DISK / VOLUME INFORMATION
[ ]
5. Exit
SYNCHRONIZING THE DATA MAY TAKE SEVERAL MINUTES.
DO NOT INTERRUPT THE PROCESS!
[ ]
SYNCHRONIZATION VERIFICATION
"DISK PORT 0"? (Y/N):
4.
5.
To Previous Page
Loading...
Need help?
General
