Operation 3–07
3.7 Emergency stop
CAUTION
An emergency stop causes extreme stress to t he engine.
Risk of overheating, damage to components!
• Initiate emergency stop only in emergency situations.
Emergency stop from LOP
Item Task
EMERGENCY STOP button Press.
• Engine is stopped by switching off power supply to ECU;
• Signalization (e.g. by horn, flashing lamp) is released.
After emergency stop from LOP
Item Task
Switching cabinet, control
panel etc. (depending on
manufacturer)
Press button for alarm acknowledgement.
• Audible and visual signalization stops.
M015560/00E 03-05 ©MTU
To Next Page