6–22 Fuel System (Low Pressure)
6.7 Fuel System (Low Pressure)
6.7.1 Fuel – Draining
Preconditions
• Engine is stopped and starting disabled.
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid naked flames, electrical sparks and ignition sources.
• Do not smoke.
Fuel – Draining
1. Loosen nut (arrow) on banjo union.
2. Remove fuel line from non-return valve.
3. Unscrew non-return valve on end piece (arrow)
and drain fuel into a suitable container.
4. When the fuel flow has stopped, install non-return
valve with new sealing ring and tighten.
5. Install fuel line.
6. Tighten nut on banjo union.
M015560/00E 03-05 ©MTU
To Next Page