MTU 16V 2000 G63 - 3.2 Putting the engine into operation after scheduled out-of-service-period

3–02 Operation
3.2 Putting the engine into operation after scheduled
out-of-service-period
Preconditions
• Engine is stopped and starting disabled.
Putting the engine into o peration
Item Task
Lube oil system Check oil level (→ Page 6 – 41);
Cooling system Check engine coolant level (→ Page 6 – 46);
Check charge-air coolant level (→ Page 6 – 52).
Cooling system Preheat coolant with preheating unit.
Fuel prefilter Drain (→ Page 6 – 28).
Monitoring equipment Carry out lamp test (see manufacturer’s documentation).
Engine/generator control system Switch ON;
Select operating mode, e.g. MANUAL OPERATION, AUTOMATIC
OPERATION.
M015560/00E 03-05 ©MTU