MTU 16V2000G65 - Page 24

Model related data (basic design)
Description 12V2000
G65
16V2000
G65
18V2000
G65
Engine with exhaust turbocharging (ETC) and
charge-air cooling (CAC)
x x x
Uncooled exhaust lines x x x
Operating method: Four-stroke cycle, diesel,
single-action
x x x
Combustion method: direct fuel injection x x x
Cooling method: conditioned water x x x
Direction of rotation: c.c.w. (facing driving end) x x x
Number of cylinders 12 16 18
Cylinder arrangement: V-angle degrees 90 90 90
Bore mm 130 130 130
Stroke mm 150 150 150
Displacement, cylinder Liter 1.99 1.99 1.99
Displacement, total Liter 23.88 31.84 35.82
Compression ratio 16 16 16
Cylinder heads: Individual cylinder heads x x x
Cylinder liners: wet, replaceable x x x
Number of inlet valves per cylinder 2 2 2
Number of exhaust valves, per cylinder 2 2 2
Standard housing connecting flange (engine
main PTO)
SAE 0 0 0
Flywheel interface DISC 18" 18" 18"
Air / exhaust gas
Description 12V2000
G65
16V2000
G65
18V2000
G65
Charge-air pressure before cylinder - DL R bar abs 2.5 2.5 2.4
Coolant system (HT circuit)
Description 12V2000
G65
16V2000
G65
18V2000
G65
Coolant temperature (at engine connection:
outlet to cooling equipment)
A °C 95 95 95
Coolant temperature after engine, alarm R °C 97 97 97
Coolant temperature after engine, shutdown L °C 102 102 102
Coolant antifreeze content, max. L % 50 50 50
Pressure loss in off-engine cooling system, max. L bar 0.7 0.7 0.7
24 | Technical Data | MS15018/03E 2016-02
TIM-ID: 0000010804 - 002