MTU 16V2000G65 - Putting the Engine into Operation after Scheduled Out-Of-Service-Period

5.2 Putting the engine into operation after scheduled out-of-
service-period
Preconditions
☑ Engine is stopped and starting disabled.
Putting the engine into operation
Item Task
Lube oil system Check oil level (→ Page 116);
Cooling system Check engine coolant level (→ Page 119);
Check charge-air coolant level (→ Page 129).
Cooling system Preheat coolant with preheating unit.
Fuel prefilter Drain (→ Page 104).
Monitoring equipment Carry out lamp test (see manufacturer's documentation).
Engine/generator control
system
Switch ON;
Select operating mode, e.g. MANUAL OPERATION, AUTOMATIC OPERATION.
34 | Operation | MS15018/03E 2016-02
TIM-ID: 0000002677 - 001