MTU 16V2000G65 - Page 46

Fault
code no. Full designation Meaning Action
Setting parame-
ter no.
006 SS T-Charge Air Main warning: Charge-air
temperature too high (limit
value 2, alarm configuration
parameter, see PR
2.8008.100 for explanation).
Check cooler, check
intercooler, contact
Service if no fault
detected.
2.0121.932
009 HI T-Coolant Intercool-
er
Prewarning: Coolant temper-
ature in intercooler too high
(limit value 1, alarm configu-
ration parameter, see PR
2.8008.100 for explanation).
Check cooler, con-
tact Service if no
fault detected.
2.0124.931
010 SS T-Coolant Intercool-
er
Main warning: Coolant tem-
perature in intercooler too
high (limit value 2, alarm con-
figuration parameter, see PR
2.8008.100 for explanation).
Check cooler, con-
tact Service if no
fault detected.
2.0124.932
015 LO P-Lube Oil Prewarning: Lube-oil pres-
sure too low (limit value 1,
alarm configuration parame-
ter, see PR 2.8008.100 for
explanation).
Check oil level, con-
tact Service if no
fault detected.
2.0100.921
016 SS P-Lube Oil Main warning: Lube-oil pres-
sure too low (limit value 2,
alarm configuration parame-
ter, see PR 2.8008.100 for
explanation). Automatic en-
gine shutdown.
Check oil level, con-
tact Service.
2.0100.922
024 SS Coolant Level Coolant level too low (limit
value 2, alarm configuration
parameter, see PR
2.8008.100 for explanation).
Automatic engine shutdown.
Check coolant level
in expansion tank,
check for leakage
and seal any leaks
as necessary.
2.0152.912
030 SS Engine Overspeed Engine overspeed (limit value
2, alarm configuration pa-
rameter, see PR 2.8008.100
for explanation). Automatic
engine shutdown.
Attempt to restart
engine.
2.2510.932
044 LO Coolant Level Inter-
cooler
Intercooler coolant level too
low (limit value 1, alarm con-
figuration parameter, see PR
2.8008.100 for explanation).
Automatic engine shutdown.
Check coolant level
in expansion tank,
check for leakage
and seal any leaks
as necessary.
2.0153.921
051 HI T-Lube Oil Lube-oil temperature too
high (limit value 1, alarm con-
figuration parameter, see PR
2.8008.100 for explanation).
Warning.
Check cooling sys-
tem.
2.0125.931
052 SS T-Lube Oil Lube-oil temperature too
high (limit value 2, alarm con-
figuration parameter, see PR
2.8008.100 for explanation).
Automatic engine shutdown.
Check cooling sys-
tem, contact Service
if cooling system is
in order.
2.0125.932
46 | Troubleshooting | MS15018/03E 2016-02
TIM-ID: 0000008508 - 003