7.22.6 Interface module EIM plug connections ā Check
Preconditions
ā Engine is stopped and starting disabled.
Checking EIM plug connections
1. Check both Tyco plugs (62-pole) (2) on EIM
for firm seating. Ensure that clips (3) are en-
gaged.
2. Check screws (1) of cable clamps on EIM for
firm seating. Ensure that cable clamps are
not faulty.
MS150119/01E 2016-02 | Accessories for (Electronic) Engine Governor / Control System | 149
TIM-ID: 0000017034 - 004
To Next Page
Loading...
