Thread
Not torsion-protected M
A
(Nm) Torsion-protected M
A
(Nm)
M30 1250 1575
*Protect screw shaft from torsion when tightening.
M
A
= tightening torques
Tightening torques for plug screws to MTN 5183-1 standard
This standard applies to plug screws to DIN 908, DIN 910 and DIN 7604 with threaded end to DIN 3852
Form A (sealed with sealing ring to DIN 7603-Cu).
MS150119/01E 2016-02 | General Information | 19
TIM-ID: 0000002333 - 017
To Next Page
Loading...
