19. Tighten both screws (1) on flange to specified
torque.
Note: If the drift correction (CDC) is not reset, the
emission certification of the engine becomes
void.
20. Reset drift correction (CDC) with DiaSys®
and enter injector coding (IIG) (→ Page 144).
Final steps
1. Install cylinder head cover upper section (→ Page 83).
2. Open up fuel supply to engine.
MS150119/01E 2016-02 | Injector | 93
TIM-ID: 0000055245 - 006
To Next Page
Loading...
