Display text Meaning Task
TD P-Lube Oil Different measurement values trans‐
mitted by the two sensors for lube-oil
pressure measurement
1. Check LOP visually (→ Page 181).
2. Perform LOP test procedures
(→ Page 183).
3. Check ECU plug-in connections
(→ Page 176).
4. Check engine wiring (→ Page 172).
5. Contact Service
• Have sensors checked and re‐
placed, if required.
TD T-Coolant Different measurement values trans‐
mitted by the two sensors for coolant
temperature measurement
1. Check LOP visually (→ Page 181).
2. Perform LOP test procedures
(→ Page 183).
3. Check ECU plug-in connections
(→ Page 176).
4. Check engine wiring (→ Page 172).
5. Contact Service
• Have sensors checked and re‐
placed, if required.
Cylinder Cutout Measuring point "Cylinder Cutout" Status message of 'Cylinder cutout /
half of cylinders running' mode in idle
operation.
MS150031/03E 2011-10 | Troubleshooting | 103
TIM-ID: 0000008898 - 001
To Next Page