3.6 Stopping the engine at the LOP
Preconditions
☑ Engine is running in local mode.
CAUTION
Stopping the engine when it is running at full load causes extreme stress to the engine.
Risk of overheating, damage to components!
• Before stopping the engine, operate it at idle speed until operating temperatures decrease and
stable values are indicated.
Stopping the engine at the LOP
Item Action
LOP Operate engine at idle speed (→ Page 85).
Temperature readings Wait until engine is at operating temperature.
LOP Press STOP pushbutton (→ Page 85).
• STOP pushbutton is illuminated;
• engine is stopped.
MS150031/03E 2011-10 | Operation | 91
TIM-ID: 0000002293 - 004
To Next Page
Loading...
Need help?
General