RAW WATER CIRCUIT (open circuit)
Number of cylinders 8
Raw water pump: Inlet pressure, min. L bar -0.2
Raw water pump: Inlet pressure, max. L bar +0.5
Pressure loss in external raw water system, max. L bar 1.0
LUBE OIL SYSTEM
Number of cylinders 8
Lube-oil operating temperature before engine, from R °C 70
Lube oil operating temperature before engine, to R °C 75
Lube oil operating pressure before engine, from R bar 4.8
Lube oil operating pressure before engine, to R bar 5.3
Lube oil operating pressure (low idle) (meas. point: before engine) R bar 2.0
FUEL SYSTEM
Number of cylinders 8
Fuel pressure at engine supply connection, min. (when engine is starting) L bar -0.3
Fuel pressure at supply connection to engine, min. (when engine is run‐
ning)
L bar -0.3
Fuel pressure at engine supply connection, max. (when engine is starting) L bar +0.5
Fuel supply flow, max. R liter/min 1.3
GENERAL OPERATING DATA
Number of cylinders 8
Firing speed, from R rpm 100
Firing speed, to R rpm 120
STARTING (electric)
Number of cylinders 8
Starter, rated voltage (standard design) R V= 24
STARTING SYSTEM (with air/hydraulic starter motor)
Number of cylinders 8
Starting air pressure before starter motor, min. R bar 18*
Starting air pressure before starter motor, max. R bar 30
32 | Product Summary | MS150031/03E 2011-10
TIM-ID: 0000010982 - 001
To Next Page
Loading...
