LUBE OIL SYSTEM
Number of cylinders 12
Lube oil temperature before engine, from R °C 75
Lube oil temperature before engine, to R °C 85
Lube oil operating pressure before engine, from R bar 7.5
Lube oil operating pressure before engine, to R bar 8.5
Lube oil operating pressure, low idle (meas. point: before engine) R bar 3.5
FUEL SYSTEM
Number of cylinders 12
Fuel pressure at supply connection on engine, min. (when engine is start‐
ing)
L bar -0.3
Fuel pressure at supply connection on engine, min. (when engine is run‐
ning)
L bar -0.3
Fuel pressure at supply connection on engine, max. (when engine is start‐
ing)
L bar +0.5
Fuel supply flow, max. R liter/min 21
GENERAL OPERATING DATA
Number of cylinders 12
Firing speed, from R rpm 100
Firing speed, to R rpm 120
STARTING (electric)
Number of cylinders 12
Rated starter voltage (standard design) R V= 24
STARTING (pneumatic starter)
Number of cylinders 12
Starting-air pressure before starter motor, min. R bar 21
Starting-air pressure before starter motor, max. R bar 30
CAPACITIES
Number of cylinders 12
Engine oil capacity, initial filling (standard oil system) (Option: max. operat‐
ing inclinations)
R liter 105
Oil change quantity, max. (standard oil system) (Option: max. operating in‐
clinations)
R liter 98
Oil pan capacity, dipstick mark min. (standard oil system) (Option: max. op‐
erating inclinations)
L liter 73
Oil pan capacity, dipstick mark max. (standard oil system) (Option: max. op‐
erating inclinations)
L liter 88
MS150031/03E 2011-10 | Product Summary | 53
TIM-ID: 0000003019 - 001
To Next Page
Loading...
