7.6.2 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001063/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Engine oil
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Draining oil via drain plug on oil
pan
1. Provide a suitable container to collect the
oil.
2. Remove drain plug (2) and drain oil.
3. Insert drain plug (2) and use torque wrench to tighten to specified tightening torque.
Name Size Type Lubricant Value/Standard
Drain plug Tightening torque (Engine oil) 100 Nm
4. Replace engine oil filter (→ Page 48).
Filling with new oil
1. Open cap (1) on cylinder head cover.
2. Fill with oil, oil filling capacity (→ Product Summary - Technical Data).
3. Close cap (1) on cylinder head cover.
4. Check engine oil level (→ Page 46).
MS15025/00E 2011-12 | Task Description | 47
TIM-ID: 0000035571 - 001
To Next Page
Loading...
