7.11.2 Engine Control Unit – Plug connection check
Preconditions
☑ Engine is stopped and starting disabled.
Checking Engine Control Unit plug
connections
1. Check firm seating of all connectors on the
Engine Control Unit. Make sure that the
clips (2) are engaged.
2. Check firm seating of all screws (1) on En‐
gine Control Unit cable clamps. Make sure
that cable clamps are not defective.
64 | Task Description | MS15025/00E 2011-12
TIM-ID: 0000032518 - 002
To Next Page
Loading...
