User Guide – Configuration Acces Industrial remote access router - RSA-series
Page 18
The Info page will show the model and general information and status of the
unit. For example:
Further details on configuration are outside the scope of this manual.
Please refer to the RSA series configuration guide for additional information.
On factory default, ssh and telnet access is enabled for the LAN port.
You can log in with user name admin and password rsa-admin.
Upon successful log-in you will get a ~# prompt.
Further details on configuration are outside the scope of this manual.
Please refer to the RSA series configuration guide for additional information.
Device Info page
Configuration
Command line
access
To Next Page
Loading...