Industrial remote access router - RSA-series User Guide –Technical Specifications
Page 19
4
Technical Specifications
Supported DSL Standards
Handshake:
• ITU-T G.994.1 (G.hs)
• ANSI T1.413 Issue 2 (ADSL)
Modulation:
• ANSI T1.413 Issue 2 (ADSL)
• ITU-T G.992.1 (G.dmt)
• ITU-T G.992.2 (G.lite)
• ITU-T G.992.3/4 (ADSL2)
• ITU-T G.992.3 Annex L (RE-ADSL)
• ITU-T G.992.3 Annex M (ADSL2 A/M)
• ITU-T G.992.3 Annex J (ADSL2 B/J)
• ITU-T G.992.5 (ADSL2+)
• ITU-T G.992.5 Annex M (ADSL2+ M)
• ITU-T G.992.5 Annex J (ADSL2 B/J)
• ITU-T G.993.2 (VDSL2, profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a) *
Note*: RSA-1220 models only
Wireless WAN modes (W3/W4 versions only)
• W3 versions: Five Band UMTS (WCDMA/FDD): 800, 850, 1900,
1700AWS and 2100 MHz.
Quad-Band GSM: 850, 900, 1800 and 1900 MHz.
• W4 versions: Five band LTE 800/900/1800/2100/2600 MHz;
FDD-Band (20,8,3,7,1); Tri Band UMTS (WCDMA):
900/1800/2100 MHz; FDD-Band (8,3,1);
Dual Band GSM/GPRS/EDGE: 900/1800 MHz
• UMTS/HSPA+, 3GPP release 6/7.
• GSM/GPRS/EDGE, 3GPP release 99/4.
• HSDPA/HSUPA data rates DL: 7.2/14.4 Mbit/s, UL: 2.0/5.76 Mbit/s.
concurrent data rate: DL 7.2 Mbit/s / UL 5.76 Mbit/s.
• LTE Cat. 3 DL: max. 100 Mbps, UL: max. 50 Mbps, 2x2 DL MIMO
• Approvals: R&TTE, GCF, CE, FCC, IC, PTCRB, UL
Ethernet ports
• 10/100baseT
• Half and Full duplex
• Auto-MDI/MDIX
• IEEE 802.1Q VLAN support
To Next Page
Loading...