RSA-1120, RSA-1220 Industrial Remote Access Router
Compliances
CE Compliance
• EMC: Directive 2004/108/EC (EN 55022, EN55024)
• Safety: Directive 2006/95/EC (EN 60950)
The RSA series of routers complies with EMC directive 2004/108/EC and is
classified for use in Residential areas. Test standard: EN 55022 Class B
The RSA series also complies with the Immunity standard for ITE equipment
EN 55024 with the applicable test levels increased to levels compatible with
Industrial standards (ref. EN 61000-6-2).
About this user guide
Although this user guide was written with greatest possible care, omissions and
errors cannot be precluded.
MuLogic BV accepts no liability for any inaccuracies that may be found.
However, if you have comments or suggestions about this guide, please don’t
hesitate to contact us in order to help us to improve our product documentation.
Use of open source software
The firmware of the RSA series partly contains open source software that was
written under GNU General Public Licence (GPL). The source code of this open
source software can be made available on request.
Contact MuLogic for more information.
Tel: +31 850 160600
Fax: +31 850 160601
E-mail: doc@mulogic.com
Website: www.mulogic.com
© MuLogic BV, 2016-2018
This guide is for information purposes only. All design characteristics,
specifications, etc. are subject to change without notice.
No part of this publication may be reproduced, transmitted, transcribed, stored
in a retrieval system or translated into any human or computer language in any
form by any means without the prior permission of MuLogic BV.
Issue No 1.2 (October 2018)