50mm
50mm
50mm
50mm
50mm
Section 2 – General description and function of the unit
The Icecore 10 family of remote coolers have been designed to carbonate, recirculate
and chill mains potable water and chill soft drinks syrup. This equipment is designed to
be installed in cellars, ventilated storerooms and areas generally away from the point
of dispense. It is to be installed in the system between the bulk storage facility and the
Dispense Head with the product(s) passing through the cooling coils of the unit. There
are NO other recommended uses for this equipment.
This equipment should be used only in accordance with the instructions; it should not
be used for any other purpose.
The equipment is not intended for use with alcoholic beverages, fruit juice or milk
based beverages.
Do not operate the equipment in a wet environment.
Any spillage must be wiped dry immediately.
The unit should not be installed in small enclosed spaces such as cupboards or
SDQWULHVZKHUHIUHVKDLUȵRZLVUHVWULFWHG$OZD\VLQVWDOOLQDZHOOYHQWLODWHGDUHD7KH
unit requires 50mm minimum clearance all around and to be open at front. (Ref to
Diagram A) Welbilt do not recommend installing the equipment in close proximity to
other heat rejecting equipment as this may reduce performance.
Diagram A
8
Section 2
To Next Page
Loading...
Need help?
General
