Need help?Do you have a question about the MULTISPAN UTC-1202G and is the answer not in the manual?
Details relay type, rating, and output signal specifications.
Specifies input types (J, K, PT-100, PT.1) and their corresponding ranges.
Defines display resolution and measurement accuracy for the controller.
Details the display segments, available keys, and their functions.
Covers unit dimensions, control algorithms (PID, TP, ON-OFF), and alarm types.
Specifies the required supply voltage and power consumption.
Dimensions required for mounting the controller in a panel.
Overall external dimensions of the controller unit.
Instructions for setting and adjusting parameter values.
Explanation of the status indicators on the controller.
Adherence to safety codes, symbols, and instructions for safe operation.
Warnings and procedures to prevent electric shock during installation and operation.
Lists factory default values for various control parameters.
Defines codes and meanings for control parameters like PB, IT, DT, CT.
Describes parameters for set points, alarms, password, and input.
Describes how to use the soak feature for preset temperature holds.
Explains handling of soak time during power interruptions.
Lists error codes (OPEN, S-E) and their corresponding meanings.
Provides steps to troubleshoot and resolve displayed errors.
Procedure for setting process value (PV) and set value (SV).
Configuration of PID, TP, and BL.TP control parameters.
Setup for various cases like Heat+Soak+Alarm, Heat+Cool, etc.
Illustrates ON-OFF control behavior for heating applications.
Illustrates ON-OFF control behavior for cooling applications.
Explains automatic computation of PID parameters and tuning LED indication.
Details relay type, rating, and output signal specifications.
Specifies input types (J, K, PT-100, PT.1) and their corresponding ranges.
Defines display resolution and measurement accuracy for the controller.
Details the display segments, available keys, and their functions.
Covers unit dimensions, control algorithms (PID, TP, ON-OFF), and alarm types.
Specifies the required supply voltage and power consumption.
Dimensions required for mounting the controller in a panel.
Overall external dimensions of the controller unit.
Instructions for setting and adjusting parameter values.
Explanation of the status indicators on the controller.
Adherence to safety codes, symbols, and instructions for safe operation.
Warnings and procedures to prevent electric shock during installation and operation.
Lists factory default values for various control parameters.
Defines codes and meanings for control parameters like PB, IT, DT, CT.
Describes parameters for set points, alarms, password, and input.
Describes how to use the soak feature for preset temperature holds.
Explains handling of soak time during power interruptions.
Lists error codes (OPEN, S-E) and their corresponding meanings.
Provides steps to troubleshoot and resolve displayed errors.
Procedure for setting process value (PV) and set value (SV).
Configuration of PID, TP, and BL.TP control parameters.
Setup for various cases like Heat+Soak+Alarm, Heat+Cool, etc.
Illustrates ON-OFF control behavior for heating applications.
Illustrates ON-OFF control behavior for cooling applications.
Explains automatic computation of PID parameters and tuning LED indication.
General| Brand | MULTISPAN |
|---|---|
| Model | UTC-1202G |
| Category | Temperature Controller |
| Language | English |
To Next Page
