Quick Reference Guide
92
To Download a File
If you know the file name
1. From the Main Menu, type F to access the File Menu, then type D.
2. Enter the name of the file you wish to download from the BBS.
3. If a password is required, enter the password.
4. Select a file transfer protocol by typing the indicated letter, such as
Z for Zmodem (the recommended protocol).
5. If you select Zmodem, the transfer will begin automatically. If you
select another protocol, you may have to initiate the transfer your-
self. (In most datacomm programs, the PAGE DOWN key initiates
the download.)
6. When the download is complete, press ENTER to return to the File
Menu.
7. To exit the BBS, type G and press ENTER.
If you don’t know the file name
1. From the Main Menu, type F to access the File Menu. For a list of
file areas, type L, press ENTER, then type L and press ENTER
again. (If you do not type the second
L
, you will list all of the files
on the BBS.)
2. Mark each file area you would like to examine by typing its list num-
ber and pressing ENTER.
3. Type L and press ENTER to list all the files in the selected file ar-
eas. Type C to go forward in the file list, and P to go back.
4. To mark one or more files for download, type M, press ENTER,
type the list numbers of the files, and press ENTER again.
To Next Page
Loading...
