Quick Reference Guide
36
Command: &A
n
Answerback
Values:
n
= 0 or 1
Default: 0
Description: &A0 Disables answerback.
&A1 Enables answerback reply to an ID request.
Command: $A
n
Auto-Reliable Buffering
Values:
n
= 0 or 1
Default: 0
Description: $A0 Discard data received during establishment of a
reliable connection.
$A1 Buffer data received during establishment of a
reliable connection.
Command: #A
n
Auto Speed Detection in Answer Mode
Values:
n
= 0–3
Default: 0
Description: #A0 Start at maximum speed and fall back to a lower
speed (26400, 24000, 21600, 19200, 16800,
14400, 12000, 9600, 7200, 4800, 2400, 1200, or
300 bps) as line conditions warrant.
#A1 Maximum speed only.
#A2 Start at maximum speed and fall back
decrementally to 4800 bps only.
#A3 Start at 2400 bps and fall back to 1200 to 300
bps only.
Command: B
n
Answer Tone (ZDXI modems only)
Values:
n
= 1
Default: 1
Description: B1 Select Bell answer tones, including Bell 103.
To Next Page
Loading...
