Multitech MT2834ZDX - Telephone and Phone Set Connections; Connecting to the Telephone Line (LINE); Connecting a Telephone Set (PHONE)

Quick Reference Guide
28
Connecting to the Telephone Line (“LINE”)
Plug one end of the cable provided with the MT2834ZDX into the tele-
phone jack in your home or office. Plug the other end into the LINE jack
on the MT2834ZDX.
Note: The ZDX's LINE jack is not interchangeable with the PHONE
jack. Do not plug the telephone into the LINE jack or the line cable into
the PHONE jack.
Note: The Federal Communications Commission (FCC), Industry Can-
ada, and the British Approvals Board for Telecommunications (BABT)
impose certain restrictions on equipment connected to public telephone
systems. See Appendix A for more information.
Connecting a Telephone Set (“PHONE”)
If you wish to connect a telephone to the same line as the ZDX, you
may plug it into the latter's PHONE jack. This connector is provided as
a convenience; you may also connect your telephone to a duplex jack
inserted into your wall jack.
Note: The PHONE jack is not interchangeable with the LINE jack; do
not plug the telephone into the LINE jack or vice-versa