2 Quick Start
7
Introduction
We know you’re eager to get your Multi-Tech MultiModemZDX fax mo-
dem up and running, so we’ll skip the features for now, and show you
step-by-step how to set it up, check it out, and make your first calls.
What You’ll Need
Before starting, please make sure you have everything you need:
We supply
•
The MT2834ZDX data/fax modem
•
A DC power supply module
•
One set of four plastic feet
•
Two sets of hook-and-loop fasteners
•
One telephone cable
•
A communication software disk
•
This
Quick Reference Guide
You supply
•
A computer with an unused serial port
•
A shielded RS-232 serial cable with a male DB-25 connector on
one end and a connector to match your computer’s serial port on
the other end
•
A nearby AC power outlet
•
A nearby telephone line jack
If you are unfamiliar with computers, please see Chapter 3, “Features,”
for more information about the required equipment before you proceed.
To Next Page
Loading...
