2 Quick Start
13
Removing Your Old Modem from Windows
When a new modem replaces another modem, the old modem installa-
tion remains in Windows after you install the new modem, and the old
modem is still selected in HyperTerminal and other Windows 95 or NT
applications. Although you can change the application connection de-
scriptions one at a time, it is easier to force Windows applications to
use the new modem by removing the old modem from Windows.
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Modems icon to open the Modems Properties
dialog box.
3. In the list box, select the old modem.
4. Click Remove, then click Close.
5. The next time you dial a HyperTerminal connection, it will select
your new modem and ask you to confirm the selection.
To Next Page
Loading...
