4 AT Commands, S-Registers, and Result Codes
59
Result Codes
In command mode the MT2834ZDX can send responses, or result
codes, to your computer. Result codes are used by communications
programs and can also appear on your monitor.
AT&Q0 selects Multi-Tech result codes with
RELIABLE, LAPM,
and
COMPRESSED
modifiers (default).
AT&Q1 selects standard AT result codes without modifiers.
&Q0 Multi-Tech Result Codes &Q1 Standard AT Result Codes
Terse Verbose Terse Verbose
0OK 0OK
1 CONNECT 1 CONNECT
2 RING 2 RING
3 NO CARRIER 3 NO CARRIER
4 ERROR 4 ERROR
5 * CONNECT 1200 5 CONNECT 1200
6 NO DIALTONE 6 NO DIAL TONE
7 BUSY 7 BUSY
8 NO ANSWER 8 NO ANSWER
9 CONNECT 2400
10 CONNECT 2400
11 * CONNECT 4800 11 CONNECT 4800
12 * CONNECT 9600 12 CONNECT 9600
13 * CONNECT 14400 13 CONNECT 14400
19 * CONNECT 19200 19 CONNECT 19200
21 * CONNECT 21600 21 CONNECT 21600
24 * CONNECT 24000 24 CONNECT 24000
26 * CONNECT 26400 26 CONNECT 26400
28 * CONNECT 28800 28 CONNECT 28800
31 * CONNECT 31200 31 CONNECT 31200
33 * CONNECT 33600 33 CONNECT 33600
*
With error correction on,
RELIABLE
(or
R)
or
LAPM
(or
L
) is added to these
result codes. With data compression on,
COMPRESSED
(or
C)
is added.
To Next Page
Loading...
