Multitech MT2834ZDX - Page 52

Quick Reference Guide
44
Command: $H n Help Screens
Values: n = 1, 2, or 3
Default: None
Description: $H1 Display Help Screen #1.
$H2 Display Help Screen #2.
$H3 Display Help Screen #3.
Command: I n Inquire Product Codes
Values: n = 0, 1, or 2
Default: None
Description: I0 Display modem ID number.
I1 Display firmware version number.
I2 Display modem description.
Command: #I x Enter Login Password
Values: x = password (6–10 characters)
Default: MULTI-TECH
Description: Enters the remote configuration login password.
Command: #I= x Store Login Password
Values: x = password (6–10 characters)
Default: MULTI-TECH
Description: Stores a new remote configuration login password.
Command: L n List Commands
Values: n = 0, 5–8
Default: None
Description: L List stored telephone numbers.
L5 List current operating parameters.
L6 List current S-register values.
L7 List additional current operating parameters.
L8 List DSP code version number, processor speed,
and online diagnostic parameters.
L9 List signal strength information.