Quick Reference Guide
54
Command: Z Modem Reset
Values: n/a
Description: Reset modem to default values. Defaults come
from user NVRAM if &W0 is set, from factory
ROM if &W1 is set.
Command: , Dialing Pause
Values: n/a
Description: Placed in dialing command, comma causes
dialing pause for time set by S8.
Command: : Continuous Redial
Values: n/a
Description: Placed at end of dial command, a colon causes
continuous redial of a number (10 in DOC
modems) until answered. Not used in ZDXK or
ZDXI modems.
Command: ; Return to Command Mode
Values: n/a
Description: Placed at end of dial command, a semicolon
causes an immediate return to command mode
after dialing.
Command: ! Flash On-Hook
Values: n/a
Description: Placed in dial command, exclamation point
causes modem to flash on-hook.
Command: @ Quiet Answer
Values: n/a
Description: Placed in dial command, @ causes modem to
wait for a ringback, then 5 seconds of silence,
before processing next part of command.
To Next Page
Loading...
