PRODUCT OVERVIEW
MultiConnect
®
Cell MTC-MNK1 User Guide 5
Chapter 1 – Product Overview
About the MultiConnect Cell Modem
MultiConnect® Cell 100 Series MTC-MNK1 cellular modems are ready-to-deploy, standalone LTE Category M1
modems that provide wireless communication. The MTC-MNK1 is a compact communications platform that
provides cellular capabilities for fixed and mobile applications. It is intended for use in energy, utility, or industrial
settings. The MTC-MNK1 is available with RS-232 or as a USB to Cellular device.
Product Build Options
Product Description
MTC-MNK1-B01 LTE Cat M1 Modem, RS-232 interface with KR Accessory Kit (Korea)
MTC-MNK1-B03 LTE Cat M1 Modem, USB interface with USB Accessory Kit (Korea)
Documentation
The following documentation is available on the product page of the MultiTech website
(https://www.multitech.com/brands/multiconnect-cell-100-series).
Document Description
MultiConnect Cell User
Guide
This document. Provides an overview, safety and regulatory information,
schematics, and general device information.
Telit ME910C1 AT
Commands Reference Guide
You can configure the device using the LTE AT Commands. These commands are
documented in the Telit AT Command Reference Guide P/N: 80529ST10815A.
USB Driver Installation Guide
for LTE Devices
The document provides instructions on USB driver installation for LTE devices P/N:
S000616.
MultiConnect Cell User
Guide
Steps for getting started with hardware. Ships with the device and is available
online. P/N: 82130650L
To Next Page
Loading...
