RPR 950 Series
also vibrate. This alert sequence can be interrupted
at any time by pressing the CANCEL button.
When used with Multitone MK6/7 code formats, your pager can
receive up to 8 different tone calls, each of which is distinguished
by a distinct beep pattern. For each call received, the
pager displays a dial tone number for the duration of the alert.
If you cancel the alert by pressing the OCR button, the call data
is displayed for an additional 2.5 seconds.
For example, a tone call with a code 3 beep timestamp
received at 12:00 p.m.
M1 tone call
A message ending with the symbol ** is displayed for all
types of calls. Initially, the message is displayed with no
backlight until you press any button.
Calls in alphanumeric message
12:00 p.m.
All messages retrieved from memory will also be
prefixed with either a "timestamp" or a message number,
depending on your system (see also section 7).
Your pager can receive alphanumeric messages of up to
120 characters. When you receive a call with an alphanumeric
attachment, if the total length of the message and
timestamp (message time or number) is less than 14
characters, the whole
call 3**
Tone-only calls
3**
Example of a tone call with M number (message):
89261 – 9629 Issue 2
+
+
Machine Translated by Google
To Next Page
Loading...
