RPR 950 Series
message is displayed for the duration of the alert, until it is
cancelled. If the alert is cancelled, the message displays
for an additional 2.5 seconds with the backlight.
Example of a message longer than 14 characters:
1:27 p.m. Your
Voice calls
Example of a message of less than 14 characters:
arrived**
visitor
M2 call
at the reception
When you receive any call with a voice message, your
pager activates the alert sequence. This sequence
includes the flashing LED and the alert tone at normal
volume, for a duration of four seconds and
If a received message has more than 14 characters, it is
divided into several segments of up to 14 characters. These
segments scroll automatically during the alert period and
are displayed for 1.25 seconds each, except on the final
screen which is displayed for 2.5 seconds. This process
then starts again until the end of the alert period, but if the
call is canceled before that time, the message scrolls
again from the beginning and pauses on the final screen.
If a call is canceled during the alert period, the MUTE
button can be used to play the message and speed up
or slow down the viewing process. If MUTE is pressed
and held the message remains on the current screen, if
MUTE is released the next screen is displayed. If MUTE is
pressed and released on the final message screen, the display
returns to the first part of the message and the entire message
viewing process begins again.
9
9261 – 9629 Issue 2
+
+
+
Machine Translated by Google
To Next Page
Loading...
