Operation
Packing products
11.06.2014 43
NOTICE Danger of material damage!
Penetration by foreign matter (e.g. liquids, product residue, foreign
bodies) will damage the vacuum pump.
Damage can cause faults in the machine, which in turn can result in
reject packs.
¾ Cancel the evacuation process immediately if foreign matter is
sucked in.
¾ Change the oil in the vacuum pump.
¾ To start the machine after it has been switched on, firmly press
the opened chamber lid shut against the resistance by pressing
the middle of its front edge.
– The processes in the machine run automatically.
– The chamber lid opens automatically after the packaging pro-
cedure.
¾ Detach the pouch neck.
¾ Check the pack.
Info
Visually inspect the packs on a regular basis while the machine is
running. Depending on product and pack it may be necessary to
carry out additional and considerably more complex test proce-
dures. This is the responsibility of the operating company, see Sec-
tion 1.7.11 "C
HECKING THE PACKS".
¾ If necessary, adapt the times to the product.
¾ Save recipe, see Section 4.8.2 "SAVE RECIPE".
To Next Page
Loading...
