What to do if the vacuum sensor is defective on my Multivac Kitchen Appliances?
If you are experiencing issues with your Multivac Kitchen Appliances related to the vacuum pump not switching off, ventilation valve not opening, vacuum sensor being incorrectly calibrated or defective, gas valve not opening, or the evacuation system leaking, notify the service.
Why is the seal seam uneven and wavy on my multivac C200?
If the seal seam of your Multivac Kitchen Appliances is uneven and wavy, it could be due to: * The pressure difference between the chamber and the outside environment not being large enough before the sealing process. Try reducing the evacuation pressure value, gas flushing pressure value, and gas flushing time value. * Worn Teflon tapes on the sealing bar and counter-pressure bar. Change the Teflon tapes. * A worn profile thread in the counter-pressure bar. In this case, repair the counter-pressure bar.
What to do if my Multivac Kitchen Appliances machine does not run?
If your Multivac Kitchen Appliances machine does not run, check the following: 1. Ensure the machine is switched on. 2. Verify the mains plug is plugged in. 3. Make sure the ambient temperature is within the permissible range. Refer to the 'Technical Specifications' for the correct range.
What to do if the chamber lid on my Multivac Kitchen Appliances won't stay closed?
If the chamber lid of your Multivac Kitchen Appliances does not remain closed despite the pump running, it might be because: * The chamber lid was pressed closed too briefly. Try pressing the chamber lid shut more evenly, firmly, and for a longer duration. * The chamber lid gasket is dirty. Clean the chamber lid gasket. * The chamber lid gasket is damaged. Change the chamber lid gasket.
What to do if the gas valve does not open on my multivac C200?
If you are experiencing issues with your Multivac Kitchen Appliances related to the vacuum pump not switching off, ventilation valve not opening, vacuum sensor being incorrectly calibrated or defective, gas valve not opening, or the evacuation system leaking, notify the service.
What to do if the evacuation system is leaking on my Multivac Kitchen Appliances?
If you are experiencing issues with your Multivac Kitchen Appliances related to the vacuum pump not switching off, ventilation valve not opening, vacuum sensor being incorrectly calibrated or defective, gas valve not opening, or the evacuation system leaking, notify the service.
How to resolve insufficient oil quantity in my Multivac Kitchen Appliances?
If there is insufficient oil quantity or the oil in the vacuum pump of your Multivac Kitchen Appliances is too old, refill or replace the oil.
What to do if the vacuum pump does not switch off on my multivac C200 Kitchen Appliances?
If you are experiencing issues with your Multivac Kitchen Appliances related to the vacuum pump not switching off, ventilation valve not opening, vacuum sensor being incorrectly calibrated or defective, gas valve not opening, or the evacuation system leaking, notify the service.
How to adjust gas flushing pressure on my multivac C200?
If the gas flushing pressure is set too high on your Multivac Kitchen Appliances, reduce the gas flushing pressure value.
What to do if the pouch neck is hard to sever on my multivac C200 Kitchen Appliances?
If the excess pouch neck can only be severed with difficulty at the sever seal or it can not be severed at all on your Multivac Kitchen Appliances, increase the value for sealing time in small increments.
Provides fundamental safety guidelines, target user qualifications, and responsibilities.
Specifies the machine's designated purpose and limitations for safe operation.
Details prohibited operational methods that deviate from intended use.
Highlights consequences of neglecting operational procedures and maintenance.
Outlines legal and operational duties for the machine operator.
Explains the function of keys and display elements on the control panel.
Step-by-step guide for initial machine placement, connection, and power-on.
Procedure for powering up the machine and initiating its operational readiness.
Steps to safely power down the machine and perform post-operation tasks.
Detailed instructions on how to place and pack products for vacuum sealing.
Guides on loading, saving, and deleting product-specific recipes.
Overview of recommended maintenance tasks and their frequencies.
Detailed procedures for routine checks and component upkeep.
Lists symptoms, causes, and solutions for machine errors indicated by diagnostic codes.
Identifies common issues and their remedies when no diagnostic code is displayed.
General| Product Type | Vacuum Sealer |
|---|---|
| Model | C200 |
| Sealing Method | Heat Sealing |
| Vacuum Power | 0.8 bar |
| Bag Width | Up to 300 mm |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Additional Features | Built-in cutter |
To Next Page
