What to do if the ventilation valve does not open on my multivac C200 Kitchen Appliances?
If you are experiencing issues with your Multivac Kitchen Appliances related to the vacuum pump not switching off, ventilation valve not opening, vacuum sensor being incorrectly calibrated or defective, gas valve not opening, or the evacuation system leaking, notify the service.
What to do if the vacuum pump does not switch off on my multivac C200 Kitchen Appliances?
If you are experiencing issues with your Multivac Kitchen Appliances related to the vacuum pump not switching off, ventilation valve not opening, vacuum sensor being incorrectly calibrated or defective, gas valve not opening, or the evacuation system leaking, notify the service.
How to resolve insufficient oil quantity in my Multivac Kitchen Appliances?
If there is insufficient oil quantity or the oil in the vacuum pump of your Multivac Kitchen Appliances is too old, refill or replace the oil.
What to do if products give off steam during evacuation in my multivac C200?
If you observe moist or liquid products giving off steam during the evacuation process of your Multivac Kitchen Appliances, abort the evacuation process with the key in case the chamber lid mists up. Pack product with the Automatic function and set the value for the Automatic sensitivity.
How to replace chamber lid gasket on my Multivac Kitchen Appliances?
If the chamber lid gasket is damaged on your Multivac Kitchen Appliances, change the chamber lid gasket.
What to do if my multivac C200 pack is leaking?
If your Multivac Kitchen Appliances pack is leaking, there could be several reasons: * The sealing time might be set incorrectly, so increase the value for sealing time in small increments. * The pouch neck might be clamped by the chamber lid. Ensure the film pouch is inserted so that the pouch neck lies within the chamber, and cut off the pouch neck if necessary. * The seal seam might be dirty, so keep the inside of the film pouch clean in the area of the seal seam. * The film pouch could be damaged; use a new one. * The film pouch might not be suitable for sealing; use a film pouch suitable for sealing.
What to do if the pouch neck is clamped by the chamber lid in my Multivac Kitchen Appliances?
If the pouch neck is clamped by the chamber lid on your Multivac Kitchen Appliances, insert the film pouch so that the pouch neck lies within the chamber. Cut off the pouch neck if necessary.
How to adjust gas flushing time on my multivac C200 Kitchen Appliances?
If the gas flushing time is set too high on your Multivac Kitchen Appliances, reduce the gas flushing time value.
How to adjust gas flushing pressure on my multivac C200?
If the gas flushing pressure is set too high on your Multivac Kitchen Appliances, reduce the gas flushing pressure value.
How to fix poor vacuum in my multivac C200 pack?
To resolve the issue of poor vacuum in the pack with your Multivac Kitchen Appliances, reduce the evacuation pressure value.
Provides fundamental safety guidelines, target user qualifications, and responsibilities.
Specifies the machine's designated purpose and limitations for safe operation.
Details prohibited operational methods that deviate from intended use.
Highlights consequences of neglecting operational procedures and maintenance.
Outlines legal and operational duties for the machine operator.
Explains the function of keys and display elements on the control panel.
Step-by-step guide for initial machine placement, connection, and power-on.
Procedure for powering up the machine and initiating its operational readiness.
Steps to safely power down the machine and perform post-operation tasks.
Detailed instructions on how to place and pack products for vacuum sealing.
Guides on loading, saving, and deleting product-specific recipes.
Overview of recommended maintenance tasks and their frequencies.
Detailed procedures for routine checks and component upkeep.
Lists symptoms, causes, and solutions for machine errors indicated by diagnostic codes.
Identifies common issues and their remedies when no diagnostic code is displayed.
General| Product Type | Vacuum Sealer |
|---|---|
| Model | C200 |
| Sealing Method | Heat Sealing |
| Vacuum Power | 0.8 bar |
| Bag Width | Up to 300 mm |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Additional Features | Built-in cutter |
To Next Page
