multivac C200 - Shutdown, Transport, Storage; Taking the Machine Out of Service; Transporting the Machine

Shutdown, transport, storage
78 03.06.2014
9 Shutdown, transport, storage
Info
Observe the safety instructions, see Section 1 "S
AFETY".
9.1 Taking the machine out of service
¾ Disconnect the machine from the mains electricity.
¾ If present, close the stop-cock for the gas supply and detach the
gas hose from the inert gas connection.
¾ Clean machine and then preserve it, see Section 6 "CLEANING".
¾ Close chamber lid and lock it in place.
9.2 Transporting the machine
9.2.1 Transporting the machine
¾ Wear personal protective equipment.
WARNING
Injury hazard!
The machine is heavy.
Carrying the machine can cause injuries.
¾ Have a second person assist you.
NOTICE Danger of material damage!
At an inclination of more than 15°, the oil in the vacuum pump
shifts.
The air de-oiling elements will get wet from the oil and become inef-
fective. This will damage the vacuum pump.
¾ Transport and set the machine down as horizontally as possi-
ble.
¾ Do NOT tilt the machine.
¾ Carefully raise the machine.
¾ For machine dimensions and weight, see "Technical specifica-
tions".
¾ Transporting the machine
¾ Avoid severe jolts.