Cleaning
Cleaning recommendations
56 03.06.2014
¾ Leave the chamber lid open to dry.
¾ If present, open the stop-cock for the gas supply.
¾ Connect the machine to the mains electricity.
¾ Clean the cleaning devices (e.g. rubber wipers, brushes).
¾ Place cleaning devices in disinfectant solution.
¾ Unpack the film pouches and lay them ready.
¾ Perform a vacuum test, see Section 7.8 "PERFORMING THE VAC-
UUM TEST".
6.3 Care products table
Recommended care products:
Type Manufacturer Designation
Ecolab Europa P3-topax 12
Ecolab USA Quorum Pink II
Shureclean VK10 Diversey Europe
JD Shureclean Plus VK9
Shureclean VK10
Cleansers, neutral
Diversey USA
JD Shureclean Plus VK9
Ecolab Europa P3-topactive LA
JD Ultraclean VK3 Diversey Europe
Diverfoam SMS HD VF22
JD Ultraclean VK3
Cleansers, alkaline
Diversey USA
Diverfoam SMS HD VF22