Cleaning
Cleaning recommendations
03.06.2014 55
¾ Disinfect entire chamber with alcohol-based disinfectant.
¾ Dry a wet chamber lid gasket or groove with a new cloth or blow
them dry with sterile compressed air.
¾ Install the chamber lid gasket.
¾ Press the chamber lid gasket into the groove of the chamber
lid.
– The beginning and end of the chamber lid gasket must butt
up against each other without a gap.
¾ During insertion, do not stretch the chamber lid gasket.
¾ Smooth out chamber lid gasket.
To Next Page
Loading...
