Operation
Packing products
03.06.2014 39
¾ Remove the finished pack.
¾ Check the pack.
Info
Visually inspect the packs on a regular basis while the machine is
running. Depending on product and pack it may be necessary to
carry out additional and considerably more complex test proce-
dures. This is the responsibility of the operating company, see Sec-
tion 1.7.11 "C
HECKING THE PACKS".
¾ If necessary, adapt the settings to the product.
¾ Enter all required times and values.
¾ Save recipe, see Section 4.8.3 "SAVE RECIPE ".
4.4 Opening and closing menus
4.4.1 Calling up menus
¾ Press the <function selection> key.
– The "main menu" appears.
¾ Select the desired menu with the <arrow> keys.
¾ Press the <function selection> key.
– The desired menu appears.
¾ Select the desired submenu with the <arrow> keys.
¾ Press the <function selection> key.
– The desired submenu appears.
To Next Page
Loading...
