Operation
Aborting evacuation
44 11.06.2014
4.6 Aborting evacuation
Info
Vacuum lowers the boiling point of liquids. This means that liquid
products can boil during the evacuation process. The boiling prod-
uct contaminates the film pouch in the area of the seal seam and
the film pouch can therefore no longer be sealed.
¾ If the product begins to boil during the evacuation process, abort
the evacuation process with the <Stop> key.
– With machines without inert gas: the film pouch is sealed. The
chamber lid then opens automatically.
– With machines with inert gas: the film pouch is gas flushed and
sealed. The chamber lid then opens automatically.
4.7 Aborting packaging procedure
Info
The packaging procedure can be aborted at any time (e.g. the film
pouch has slipped out of position or the packaging procedure was
started with the incorrect recipe).
¾ To abort the packaging procedure, press the <Machine control
On/Off> key.
– The display goes dark.
– The chamber is ventilated.
– The chamber lid opens automatically.
– The product is not packaged.
4.8 Working with recipes
4.8.1 Load recipe
¾ Press the desired key briefly <1> to <3>.
– The recipe number appears in the display.
– The selected recipe is loaded.
Info
If the settings are changed after a recipe has been loaded, the rec-
ipe number goes out in the display.
To Next Page
Loading...
