HM3Humidier
5.7.8SettingOn/Offweeklyschedule
GotomenuMainindex>Operatingmode>Schedule.
Figure5.2Settingofschedule
Dayscheduleis“Active”forthecurrentdayinthecontroller,and“Passive”fortheotherdays.
Tosettheschedule,alwaysstartattime00.00(midnight)foreachday.
NOTE!NeverchangeTime1,00:00foreachdayoftheweek.
■SetoperationstateOnorOffforthetimeafter00.00(Value1)forMonday.
■Settimefortherstchangeofstate(Time2),andthenewstateOnorOff.
■Setnexttimeandnewstate,andcontinueuntilalltheoperationstatechangesforall24hoursofthe
rstdayarespecied.
■Continueinthesamewaywiththenextday.
■Usethecopyfunctiontosetthesametimeintervalsforotherdays.
TEN-HM3-B1506Operation28