Specifying the Network Settings 2-69
1
2
Management
Setting an E-mail Gateway
The e-mail gateway function enables you to set a prefix and suffix in advance to reduce
the operations required when transmitting faxes. When transmitting with a fax number
set, the prefix and suffix are automatically merged with the number to transmit an
e-mail.
You can also specify e-mail gateway settings using • OfficeBridge. For details, refer to
Chapter 3, “Specifying Device Settings” in the OfficeBridge Guide.
For details on transmitting faxes using the e-mail gateway function, refer to •
Chapter 4, “Various Fax Functions” in the Scanner and Fax Guide.
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Network Settings].
5
Press [e-mail Gateway].
6
To Next Page
Loading...
Need help?
General
