Muratec MFX-2590 Administrator's Guide

2-26 Function Protect Settings
Setting Function Protection
Note
To set function protection, it is necessary to set an administrator password (see page
2-4) and protect passcode (see page 2-7) in advance.
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set, press [Admin Password].
3
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Function Protect Setting].
5
Enter the protect passcode, and press [Enter].
6

Muratec MFX-2590 Specifications

General

Brand	Muratec
Model	MFX-2590
Category	All in One Printer
Language	English