Muratec MFX-2590 Administrator's Guide

2-42 Specifying the Network Settings
Function Description Settings Reference page
TCP/IP Settings You can set the settings for using
the machine on a network.
l
Host Name
l
Workgroup
l
DNS Server Addresses
l
DNS Suffix
l
Obtain IP address (DHCP)
l
IP Address
l
Subnet Mask
l
Default Gateway
l
WINS Server Address
l
IPv6 Setting
The MAC address is
entered
WORKGROUP
Not registered
Not registered
ON
OFF
192.168.1.10
255.255.255.0
Not registered
Not registered
2-43
Refer to Chapter
3, “Setting the
Connection
Environment” in
the OfficeBridge
Guide.
Archive
Settings
When the machine transmits
and receives documents via
fax or e-mail, you can transmit
those documents to a specified
destination via fax, or store them in
a specified shared folder.
Not registered 2-65
e-mail Gateway You can transmit documents to an
e-mail gateway (fax server).
l
Setting
You can specify the default setting.
l
Prefix
Enter the prefix for the local part of
the e-mail address.
Up to 32 characters can be entered.
l
Suffix
Enter the suffix for the local part of
the e-mail address.
Up to 48 characters can be entered.
ON
OFF
Not registered
Not registered
2-69
Authentication
Method
Set the authentication method for
users that log in.
Stand-Alone
Single Sign On
Network
2-32
Automatic
LogoutTime
You can set the time it takes before
the machine automatically logs out
a logged in user if no operations
have been performed on the
machine.
1 - 10min
3min
2-71
Delete
Restriction
Settings
You can initialize the access
restrictions set in OfficeBridge from
the machine.
Use this function when you cannot
access OfficeBridge.

Muratec MFX-2590 Specifications

General

Brand	Muratec
Model	MFX-2590
Category	All in One Printer
Language	English